Capacitor Out Of Foot Control Or Motor

This part is called a capacitor or used to be called a condenser. It is used inside the foot control of a sewing machine, a sewing machine motor or sometimes inside the off/on switch. From time to time it will burn out and need to be replaced, usually when it burns our you will get a strong smell with a puff of smoke.

This capacitor fits thousands of machines, too many to name, if you need advice please call us.

This capacitor is approx 17mm x 10mm x 4 mm deep. It probably will not look the same shape as the original one you need to replace, but it will do the same job when fitted correctly.

Also please note, because this part is now not manufactured by a sewing machine manufacture it is sourced else where and may have shorter leads than the image or original. The short lead type is ideal for fitting on to motor PCB's, but the leads may need to be extended for fitting into foot controls.