My Bernette B70 B79 will not embroider, even after I press the green start button?

We are often quizzed over the phone when the customer cannot get their new Bernina Bernette embroidery machine to operate.

The customer is telling us they are pressing the green start button, but the machine will not start to embroider.

The simple fix is to let the Bernette B70 or B79 calibrate to the embroidery unit and hoop correctly.

The machine does the task of calibrating itself, but the correct sequence needed is especially important. Customers often get confused about it, hence, we often hear "when I press the green button for two seconds the machine will not embroider. Whats going on?"

The video explains the steps needed and you can watch as one of our sewing machine engineers walks you through the steps one, by one.

It is the exact same steps needed on many Bernina embroidery machines.

1. Make sure the machine is powered down and off before fitting the embroidery unit.

2. First we calibrate the embroidery unit we have just fitted.

3. We then calibrate the hoop size we have just attached.

4. We are now ready to embroidery, we press the green start button for two seconds, and start to embroider.

Logged in users can submit questions. Ask us any question and we will get back to you

Your question:

Your name:

get notification on email when the answer is ready

Your e-mail:

Related Questions

Q. What are the most common sewing machine faults written by experienced mechanic

Use this section of Q & A's to find the cause of an error, then use the technical repairs section to help fix the problems.

Most ...

Q. Sew a sample to help diagnose the problem

Sew a seam on regular cotton using the same type and colour of thread top and bottom. Don't...

Q. Looping under fabric and Irregular stitches?

Is the thread bunching and looping under the fabric while stitching a seam. How to fix these Irregular stitches under the fabric. Stitches that have a small loop protruding on the top or bottom of the...

Q. Needle breaks or gets bent while stitching

Needle breaks or gets bent while stitching. First check to see if the needle is fully inserted and that the needle clamp screw is tight. Is the needle the correct size and type for the material being ...

Q. Accessories are missing from new machine

This can be quite a common issue which customers do contact us about all the time. If you can't find the accessories in the box when you recieve a new machine then chances are they are stored somewhere...

Q. Needle Threader Not Working

We ofter hear customers telling us that their automatic needle threader is not working. To ensure it operates correctly, please follow these helpful tips. There are a couple of things you can do if you...

Q. Where to oil a sewing machine

Yes, oil is needed on a sewing machine to keep it running smoothly and quietly. It will last longer and stitch more evenly as internal parts move or rotate without friction, well far less friction. Not...

Q. My Bernette B70 B79 will not embroider, even after I press the green start button?

We are often quizzed over the phone when the customer cannot get their new Bernina Bernette embroidery machine to operate. The customer is telling us they are pressing the green start button, but the...