Janome Overlock Piping Foot Set 1/8" - 3/16"
This two pack of piping feet will cover the most popular sizes or piping cord which are used most. Both feet are marked as required. 1/8" and 3/16"
Use each foot on you overlocker usually when using 2-needles and 4-threads. The foot will guide the 1/8" or 3/16" piping cord also both the top and bottom pieces of fabric. The machine can also trim at the same time to produce professional piped edging on cushions or many home decor projects.
I used this foot to insert a zip with the Janome 9300DX. It was easy to place the zip precisely using the groove underneath the foot and much easier than using the sewing machine. I can fully recommend this foot for its versatility.
The piping foot is excellent for attaching a zip using the overlocker 9300DX. Previously I had used the sewing machine, but because of the groove it is so easy to place correctly. Fully recommended.
I wanted to use my over locker to insert a zip and had watched a lot of you tube videos showing this. The lovely people at Sewing machine sales new instantly that a Piping foot had the required groove in the bottom to take the zip, and which type was required for my (old) over locker.
The larger of the two feet works well, and l inserted a zip into a bag on my first attempt. You should always use a nylon zip, never metal and l needed to move the knife across to give a wider selvidge. I have not tried using this foot yet to make piping cord but will probably try later.