Brother 3034D Overlocker (3034DWT)

The 3034D (3034DWT) Overlocker by Brother, has excellent engineering and quality. It Includes 3 extra feet and the WT stands for Wide Table which is also included, it is ready to overlock bedding, clothing, quilts, or craft projects without too much mess, thanks to the included fabric catcher.

Overlocking at speed is not a problem, the 3034d is speedy at 1300 stitches per minute. The foot control is electronic! meaning greater speed control and even at slow speeds the electronics tell the motor to give the needles full piecing power even when stitching very slowly.

Threading is straightforward by following the colour-coded guides with F.A.S.T looper threading system, plus it has the big advantage of having built-in rolled hemming with the flick of a lever it's back to regular overlocking. The upper knife can be quickly set not to trim if required.

Key 3034D Features:

• Carry handle for easy portability
• 3 or 4 thread, sew-&-cut overlock stitches
• F.A.S.T lower looper threading system
• Instructional DVD
• Differential feed
• Dust cover
• Free arm or flatbed
• Removable knife
• Easy-to-access controls
• Pressure foot pressure control
• Fabric offcuts catcher
• Adjustable length (0.7 - 4.0mm) and stitch width (1.0 - 7.0mm)
• Thread twist protection system
• Lightweight 5.6kg

The 3034D will trim, edge, and neaten for a professional finish that won't fray or unwind. The convenient "lay in" tension units, manual tension release and the "easy thread" left looper make threading this overlocker as easy as it gets. It is also fitted with a bright LED built-in for better lighting around the foot and needle area while overlocking. All control dials used for your differential feed and stitch length are on the right-hand side, hence no longer obscured by your stitching project if you need to adjust mid-overlock.

Stitches include 4-thread overlock, 3-thread overlock wide (5.0mm), and narrow (2.8mm), rolled hemming, narrow hems, flatlock.

Additional capabilities with the extra feet included: Blind hemming, pin tucks, and flatlock. Add piping or gathering effects.

Adjustable stitch length, cutting width, and differential feed make this machine incredibly versatile. It also features a free-arm/flatbed convertible sewing surface for easy control when overlocking cuffs and sleeves, saving time and producing professional results.

As already mentioned our 3034DWT also comes with a wide table extension to use as a fabric rest which is useful for larger projects, blind hemming, piping, and the most popular after-market purchase, the gathering foot, plus an excellent instructional DVD explaining the threading and use of the machine and handy Fabric waist catcher...!

Features such as convenient colour-coded thread paths making threading quick and simple, built-in rolled hem, easy threading left looper, and of course, the differential feed adjustment to help cope with the most demanding fabric. The differential feed can also be used for applications such as gathering. The looper cover doubles as a storage tray which keeps the accessories at hand ready to be used when required.

Whats In The Box:

• Extension table / Fabric rest
• Fabric waste catcher
• Thread nets
• Spool caps
• Needle replacement hexagonal driver
• Needle pack - uses standard type sewing machine needles 15x1
• Lint brush
• Dust cover
• Tweezers
• Instructional DVD
• Electronic foot speed controller.

Presser Feet Included:

• General overlock foot
• Blind stitch hem foot
• Gathering Foot
• Piping Foot
• Overlocking Foot.