Roller press will not steam.

Quite a common cause for a roller press not steaming could simply be a damaged or jammed polystyrene float. To acces the float follow the procedure below or consult the user documentation.

1 Remove the drain plug from the water reservoir located underneath the machine (use a bucket to capture any water if the reservoir is full)

2 Check there is no visible damage to the float, if there is it will need to be replaced.

3 Make sure the float moves freely up and down the shaft of the drain plug, if not clean the shaft with soapy water and rinse.

4 Repalce the drain plug, re-fill the machine and try again.